Pay in installments of $6.47 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 2 - Jul 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
buffered splitter pedal BS23™ Buffer/SplitterA hand built signed (by Mario) release of the Axess Electronics BS2 Buffer Splitter, one of the first off the shelf buffers ever available and used by countless pros like EVH, Alex Lifeson, Brad Paisley, Jeff Schroeder, and many, many more These will be manufactured using the final handful of N. O. S. gold plated printed circuits boards from the last full scale BS2 production run (~2009), and the circuit's been tweaked to Axess' modern 2023 specs,
- A hand-built/signed (by Mario) release of the Axess Electronics™ BS2™ Buffer/Splitter, one of the first off - the - shelf buffers ever available - and used by countless pros like EVH, Alex Lifeson, Brad Paisley, Jeff Schroeder, and many, many more...
- These will be manufactured using the final handful of N. O. S. gold-plated printed circuits boards from the last full-scale BS2 production run (~2009), and the circuit's been tweaked to Axess' modern/2023 specs, resulting in an even more natural sounding guitar audio buffer experience.
- Housed in a rugged 4.81 x 2.62 x 1.54inch / 122.3 x 66.6 x 39.1mm plus 0.03inch / 0.8mm (thickness of the laser engraved acrylic plate) diecast aluminum enclosure for years of reliable use.
- Just like the original, the BS23 prevents the loss of (1) signal level (2) low end punch, and (3) high end frequency response, due to cable capacitance and the poorly designed input stage/circuitry of some effect pedals.
- The buffer circuit is an ultra high quality Op-Amp based design that's both low-noise and MUSICAL! Though nothing is transparent - the BS23 sounds and feels very natural.
- Three outputs allow a guitar to feed a tuner, noise gate key, and multiple effect pedals into an amp, or even two or three amps, without any signal loss or tonal degradation.
- These three outputs are connected in parallel and one is transformer isolated to prevent any ground loop hum/noise when driving two amplifiers.
- The transformer isolated output is equipped with a phase flip switch to prevent phase issues when driving two or three amplifiers.
- Powered with 9VDC via a 2.1 x 5.5mm barrel plug with a negative centre pin (like Boss pedals) and the current draw is less than 100mA (adapter not included).
- Optional (2nd) Transformer Isolated Output - isolating the 'SPLIT' output jack allows driving three amps without ground loop hum/noise issues (in most situations).
User Manual and Wiring Diagrams (click to enlarge).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1895 reviews
Sort
Product Reviews
★★★★★ 4
Our dogs love these bones.
Flavor Name: Bacon, Size: X-Large
ALWAYS SUPERVISE A DOG WHEN THEY ARE CHEWING OR EATING. It doesn't matter what it is, they can choke on anything, we have had multiple instances where we have had to intervene to prevent or stop choking.
I also was going to give this a 5 star review, but after reading the other reviews I didn't. The pet product industry really needs to educate the consumer more about pets and what type would do best with their product. Either way, I think my experience might be helpful to some and we are pretty happy with these bones because the dogs are.
Here's the short version of my recommendations:
I do not recommend Nylabones for dogs that are teething
If an adult dog is chewing non-stop, Kongs with treats or peanut butter are great to help break up the chewing time. Even if they won't chew the Kong, they'll definitely stop whatever they are doing and lick out all of the peanut butter, which is actually calming and tiring for dogs.
It might be worth trying a much larger size bone if you have a smaller dog. I never had small dogs until now, but the large bone seems to tire our 20 pound dogs out quicker than the smaller bones ever did, and their little jaws seem to handle it just fine.
All of our dogs are gnawing with their back teeth at an angle on the white nyla part, as though they are rubbing their teeth against it to clean and sharpen them. The other type of chewing would use more of the front teeth and pull, like they're cleaning meat off of a bone, which isn't the right kind of chewer for Nylabones. Ours only occasionally chew them like that, so I know they are eating some pieces but it doesn't seem to affect their health since it's pretty limited and small (like a crumb).
Here's my experience with these bones:
We got our first Nylabone's for small breed puppies about a 18 months ago (not this product but same brand), and the puppies did try swallowing big chunks, so this type of bone was not great for them yet.
However, our old large breed dog decided he wanted to chew on the small puppy bones too, so I got him the large one of this bone because it's huge with four points, and more his size. It could be a challenge for dogs who don't use their paws like hands, but ours seem to figure it out comfortable ways to chew on it.
The old dog absolutely loved it, and had no big chunk issues. He very quickly figured out not to chew the red part because it is a totally different plastic than the white part (which is whatever "Nyla" is).
My understanding from the package is that the white part is somewhat digestible, or safely passes through in very small pieces. I specifically remember that being why I decided to try these. Our big dog used to choke on raw hides when he was younger, so we had to stop all chewing things (which just meant more treats and walks so he was happy!), but now that he is older he is really enjoying this bone.
Our old dog did wear one down to the nubs after about 3-6 months, and continued chewing on it occasionally (less often since there is less there to chew, and I knew I was supposed to toss it but he loved it so much). So I just got him a new one, but he still carries around the old one to show it off when we come in the door. He's chewing the new one now, so he seems to understand that the old one is 'done', and I haven't felt the need to take it away for safety reasons. The funny part is that the small dogs (now 2 yr old) actually chew on his large bone too, it's pretty comical given the size difference. I got them the extra-small versions and they haven't shown much interest in those.
I decided to also get one for our new 'store' dog who is about 1.5 yrs old and a lab/boxer mix and lives at the store full time. It was to help him transition away from his neurotic tail biting and rope bone that is falling apart from his prior home (where he was EXTREMELY bored and was getting into everything). He has enjoyed the Nylabone for about 2 weeks. I don't think it's worn down too much yet, but he's definitely going to wear his out faster (maybe 2+ months?) than our other three dogs combined, but his teeth are also sharper and he chews more, so that's fair.
So far, no pieces or chunks from the Nylabone. He also hasn't had a problem leaving the red part alone and he's learning how to use his paws more because of the shape of this thing. He still uses it when he's bored, but we've started increasing his training practice, so hopefully he'll be past the chewing phase by 2 yr old, and he has stopped getting into anything (like trash or 'stuff left out' that dogs manage to get into). He's also a huge and a very active dog, so having regular customers and activity help tire him out more than any bone can.
Best of luck!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2019
★★★★★ 5
Two pits they last forever
Flavor Name: Bacon, Size: X-Small
Dogs love this bone
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
variety of texture and focal points, lab approved
Flavor Name: Bacon, Size: X-Large
My labs dont try to destroy stuff. They just like to gnaw on something once in awhile. This has lasted a very long time. Has the typical dents and other gnaw marks, but has otherwise withstood the test of time. The different texture (very firm but with mild "give") and spots to focus on has made this a favorite go-to toy when the need to gnaw comes about. We often do bully sticks and yak chews for the majority of their chewing needs, but the nylon style also seems to hit the spot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2021
★★★★★ 3
I find it sharp edges after just a little bit of chewing
Flavor Name: Bacon, Size: X-Large
My two Labradors are just not interested in this product also it's very sharp after chewing it briefly I like the Unique Style Unfortunately they are not interested maybe it's just them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
★★★★★ 5
Wonderful Bone Loved by Dogs
Flavor Name: Bacon, Size: Medium
Dogs love all the knobs. Easy for them to hold.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 17, 2026